P001 Piston Flow Meter


P001 Piston Flow Meter
Features
  • Flow range: 0.005 to 200 cc/min (0 to 0.053 gpm)
  • Accuracy (at 3 cP): ± 0.2% of reading over a 200:1 range
  • Maximum Operating Pressure: 500 bar (7250 psi)
  • Displacement: 0.3 cc/rev (0.018 in3/rev)
  • Weight: 0.9 kg (2.0 lbs) Dimensions: Ø 57mm x 90mm tall (Ø 2.3” x 3.5” tall)
  • Recommend Filtration: 5 micron (2400 mesh)
  • Port Size: 1/4" or 6mm tube fitting
  • Fluids: Most non aqueous, hydrocarbon based fluids

 

Materials of Construction

  • Body: Case hardened stainless steel, type 316
  • Pistons: Case hardened stainless steel, type 316
  • Crankshaft: Stainless steel, type 316
  • Bearings: Hybrid – ceramic balls with enhanced corrosion resistant stainless steel
  • Seals: Viton® "O" rings - standard; Perfluoroelastomer - optional

 


 

 

Transmitter Variations (dependent on model #)

Model

P001 Frequency
Single phase:
  • Output Signal: 5V single phase (current sinking, also available)
  • Output Resolution: typical k-factor 12,000 pulses/cc
  • Temperature Rating*: -40°C to 225 °C

Quadrature:

  • Output Signal: 5V Quadrature
  • Output Resolution: typical k-factor 24,000 pulses/cc
  • Temperature Rating*: -40°C to 225 °C
P001 Analog
  • Output Signal: ± 20mA or ± 10V
  • Output Resolution: 16 bit
  • Temperature Rating*: -40°C to 225 °C

*See spec sheets for temperature rating of each model

Compliance: CE Certified, Ex-proof version available with ATEX/IECEx II 2 G Ex d IIB Tx Gb as well as UL, cUL certification for Class 1, Division 1, Groups C and D, Tx

 

Dimensional Drawing

P001 Piston Flow Meter

Pressure Drop Curve 

P001 Piston Flow Meter